noddi: Neurite Orientation Dispersion and Density Imaging¶

https://mybinder.org/badge_logo.svg

Contents

% This m-file has been automatically generated using qMRgenBatch(noddi)
% for publishing documentation.
% Command Line Interface (CLI) is well-suited for automatization
% purposes and Octave.
%
% Please execute this m-file section by section to get familiar with batch
% processing for noddi on CLI.
%
% Demo files are downloaded into noddi_data folder.
%
% Written by: Agah Karakuzu, 2017
% ==============================================================================

1. Print noddi information

qMRinfo('noddi');
  noddi:   Neurite Orientation Dispersion and Density Imaging
Three-compartment model for fitting multi-shell DWI
Pulse Sequence Diagram

ASSUMPTIONS:
Neuronal fibers model:
geometry                          sticks (Dperp = 0)
Orientation dispersion            YES (Watson distribution). Note that NODDI is more robust to
crossing fibers that DTI  (Campbell, NIMG 2017)

Permeability                      NO
Diffusion properties:
intra-axonal                      totally restricted
diffusion coefficient (Dr)      fixed by default.
extra-axonal                      Tortuosity model. Parallel diffusivity is equal to
intra-diffusivity.Perpendicular diffusivity is
proportional to fiber density
diffusion coefficient (Dh)      Constant

Inputs:
DiffusionData        4D diffusion weighted dataset
(Mask)               Binary mask to accelerate the fitting (OPTIONAL)

Outputs:
di                  Diffusion coefficient in the restricted compartment.
ficvf               Fraction of water in the restricted compartment.
fiso                Fraction of water in the isotropic compartment (e.g. CSF/Veins)
fr                  Fraction of restricted water in the entire voxel (e.g. intra-cellular volume fraction)
fr = ficvf*(1-fiso)
diso (fixed)        diffusion coefficient of the isotropic compartment (CSF)
kappa               Orientation dispersion index
b0                  Signal at b=0
theta               angle of the fibers
phi                 angle of the fibers

Protocol:
Multi-shell diffusion-weighted acquisition
at least 2 non-zeros bvalues
at least 5 b=0 (used to compute noise standard deviation

DiffusionData       Array [NbVol x 7]
Gx                Diffusion Gradient x
Gy                Diffusion Gradient y
Gz                Diffusion Gradient z
Gnorm (T/m)         Diffusion gradient magnitude
Delta (s)         Diffusion separation
delta (s)         Diffusion duration
TE (s)            Echo time

Options:
Model               Model part of NODDI.
Available models are:
-WatsonSHStickTortIsoVIsoDot_B0 is a four model compartment used for ex-vivo datasets

Example of command line usage
For more examples: qMRusage(noddi)

Author: Tanguy Duval

References:
Please cite the following if you use this module:
Zhang, H., Schneider, T., Wheeler-Kingshott, C.A., Alexander, D.C., 2012. NODDI: practical in vivo neurite orientation dispersion and density imaging of the human brain. Neuroimage 61, 1000?1016.
In addition to citing the package:
Karakuzu A., Boudreau M., Duval T.,Boshkovski T., Leppert I.R., Cabana J.F.,
Gagnon I., Beliveau P., Pike G.B., Cohen-Adad J., Stikov N. (2020), qMRLab:
Quantitative MRI analysis, under one umbrella doi: 10.21105/joss.02343

Reference page in Doc Center
doc noddi


2. Setting model parameters

2.a. Create noddi object

Model = noddi;

2.b. Set protocol and options

Protocol: MRI acquisition parameters that are accounted for by the respective model.

For example: TE, TR, FA FieldStrength. The assigned protocol values are subjected to a sanity check to ensure that they are in agreement with the data attributes.

Options: Fitting preferences that are left at user's discretion.

For example: linear fit, exponential fit, drop first echo.

2.b.1 Set protocol the CLI way

If you are using Octave, or would like to serialize your operations any without GUI involvement, you can assign protocol directly in CLI:

Gx = [0.0000; 0.0000; 0.6528; -0.3734; 0.6595; 0.4251; 0.9307; 0.2346; -0.5629; -0.1656; -0.9726; -0.0150; 0.1463; -0.2313; 0.7377; -0.7661; -0.1051; 0.0000; 0.3909; 0.1496; -0.9334; 0.1903; -0.7039; -0.5217; 0.9662; -0.3714; -0.7828; 0.8305; -0.3302; -0.2348; 0.0253; -0.5469; 0.7053; 0.0000; 0.3198; 0.7962; 0.8699; 0.6890; -0.9299; 0.0387; 0.3218; 0.3582; 0.8944; 0.4384; -0.3516; -0.1507; -0.5361; 0.5114; -0.0808; 0.0000; -0.0261; -0.4804; -0.8220; -0.3674; -0.8059; 0.9937; -0.9844; -0.4309; 0.1316; -0.0096; 0.6996; -0.6609; 0.8179; -0.7977; 0.4352; 0.0000; 0.3330; 0.5147; -0.8173; -0.5177; -0.0540; 0.0108; -0.0691; 0.8929; 0.6656; 0.3998; 0.2992; -0.6774; -0.3221; 0.5112; -0.1681; 0.0000; 0.8415; 0.2496; 0.6320; 0.1861; 0.4758; 0.7481; 0.9338; 0.6610; 0.6125; 0.6137; 0.6817; 0.0996; -0.9739; 0.8386; 0.2920; 0.0000; -0.7056; -0.2181; -0.6203; 0.0020; -0.1074; 0.2822; 0.4012; 0.5307; 0.5323; 0.9651; 0.0000];
% Gx is a vector of [109X1]
Gy = [0.0000; 0.0000; -0.6550; 0.1688; 0.7394; 0.0347; 0.0616; -0.8169; -0.0797; -0.8647; 0.0079; 0.9886; 0.7658; -0.5711; 0.5254; 0.5946; -0.9930; 0.0000; -0.4079; -0.3372; -0.2009; 0.7622; -0.4547; 0.4241; -0.2577; 0.9198; 0.6149; -0.2333; -0.8437; -0.5578; 0.1522; -0.7771; 0.6419; 0.0000; -0.6674; -0.0672; -0.1770; 0.4593; 0.3590; 0.4492; 0.4365; 0.2082; 0.4341; -0.8638; 0.8508; 0.5115; 0.3158; -0.7514; 0.9207; 0.0000; -0.9526; -0.8692; 0.3566; -0.3033; -0.5619; -0.0273; -0.1502; -0.9023; 0.1687; -0.1114; -0.7110; -0.2140; -0.3778; -0.1210; 0.6742; 0.0000; -0.5741; -0.6575; -0.5127; 0.4818; 0.5946; -0.8315; -0.7675; 0.2597; 0.3549; -0.8171; -0.0563; -0.1344; 0.2540; 0.6731; -0.9515; 0.0000; -0.4352; 0.9109; -0.0796; -0.9773; -0.8795; 0.6348; -0.2954; -0.0966; -0.4925; -0.1628; -0.4899; 0.3862; -0.2261; 0.5426; 0.9388; 0.0000; 0.1116; 0.9406; 0.7701; 0.3742; -0.4286; -0.6551; 0.7562; 0.4305; 0.4358; -0.2538; 0.0000];
% Gy is a vector of [109X1]
Gz = [0.0000; 0.0000; 0.3807; 0.9122; 0.1356; -0.9045; 0.3607; -0.5270; -0.8227; 0.4743; 0.2325; -0.1496; -0.6262; -0.7876; -0.4240; 0.2441; 0.0536; 0.0000; 0.8251; 0.9295; -0.2972; 0.6187; 0.5456; 0.7403; -0.0065; -0.1266; 0.0958; 0.5057; -0.4233; 0.7961; 0.9880; 0.3116; 0.3009; 0.0000; 0.6726; -0.6012; -0.4604; 0.5607; -0.0796; 0.8926; -0.8402; 0.9101; -0.1075; -0.2483; 0.3905; 0.8460; -0.7829; 0.4170; -0.3819; 0.0000; -0.3031; 0.1170; 0.4439; -0.8792; -0.1865; 0.1090; 0.0921; 0.0165; -0.9768; 0.9937; 0.0714; 0.7193; 0.4339; -0.5907; -0.5967; 0.0000; -0.7480; -0.5502; -0.2629; -0.7070; -0.8022; 0.5555; -0.6373; -0.3679; 0.6565; 0.4153; 0.9525; 0.7233; 0.9120; 0.5345; -0.2576; 0.0000; 0.3202; -0.3285; -0.7708; -0.1011; 0.0065; -0.1930; -0.2018; 0.7442; 0.6183; -0.7725; -0.5434; 0.9170; -0.0219; -0.0485; 0.1827; 0.0000; -0.6998; 0.2600; 0.1488; 0.9274; 0.8971; -0.7009; -0.5169; 0.7301; -0.7258; 0.0647; 0.0000];
% Gz is a vector of [109X1]
Gnorm = [0.0000; 0.0000; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0310; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0000; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0310; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0000; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0310; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0000; 0.0800; 0.0566; 0.0800; 0.0800; 0.0310; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0000; 0.0566; 0.0800; 0.0800; 0.0310; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0000; 0.0800; 0.0800; 0.0310; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0000; 0.0800; 0.0310; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0800; 0.0800; 0.0566; 0.0000];
% Gnorm is a vector of [109X1]
Delta = [0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308; 0.0308];
% Delta is a vector of [109X1]
delta = [0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128; 0.0128];
% delta is a vector of [109X1]
TE = [0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636; 0.0636];
% TE is a vector of [109X1]
Model.Prot.DiffusionData.Mat = [ Gx Gy Gz Gnorm Delta delta TE];

  See the generic notes section below for further information.

2.b.2 Set protocol and options the GUI way

The following command opens a panel to set protocol and options (if GUI is available to the user):

Model = Custom_OptionsGUI(Model);

If available, you need to close this panel for the remaining of the script to proceed.

  Using this panel, you can save qMRLab protocol files that can be used in both interfaces. See the generic notes section below for details.

3. Fit MRI data

3.a. Load input data

This section shows how you can load data into a(n) noddi object.

  • At the CLI level, qMRLab accepts structs containing (double) data in the fields named in accordance with a qMRLab model.

  See the generic notes section below for BIDS compatible wrappers and scalable
      qMRLab workflows.

%          |- noddi object needs 2 data input(s) to be assigned:
%          |-   DiffusionData
%          |-   Mask

data = struct();
% DiffusionData.nii.gz contains [74   87   50  109] data.
data.DiffusionData=double(load_nii_data('noddi_data/DiffusionData.nii.gz'));
% Mask.nii.gz contains [74  87  50] data.
data.Mask=double(load_nii_data('noddi_data/Mask.nii.gz'));

3.b. Execute fitting process

This section will fit the loaded data.

FitResults = FitData(data,Model,0);

Visit the generic notes section below for instructions to accelerate fitting by
      parallelization using ParFitData.

3.c. Display FitResults

You can display the current outputs by:

qMRshowOutput(FitResults,data,Model);

A representative fit curve will be plotted if available.

To render images in this page, we will load the fit results that had been saved before. You can skip the following code block;

% Load FitResults that comes with the example dataset.
FitResults_old = load('FitResults/FitResults.mat');
qMRshowOutput(FitResults_old,data,Model);

3.d. Save fit results

Outputs can be saved as *.nii.(gz) if NIfTI inputs are available:

% Generic function call to save nifti outputs
FitResultsSave_nii(FitResults, 'reference/nifti/file.nii.(gz)');

If not, FitResults.mat file can be saved. This file contains all the outputs as workspace variables:

% Generic function call to save FitResults.mat
FitResultsSave_mat(FitResults);

  FitResults.mat files can be loaded to qMRLab GUI for visualization and ROI
       analyses
.

The section below will be dynamically generated in accordance with the example data format (mat or nii). You can substitute FitResults_old with FitResults if you executed the fitting using example dataset for this model in section 3.b..

FitResultsSave_nii(FitResults_old, 'noddi_data/DiffusionData.nii.gz');

3.e. Re-use or share fit configuration files

qMRLab's fit configuration files (noddi_Demo.qmrlab.mat) store all the options and protocol in relation to the used model and the release version.

  *.qmrlab.mat files can be easily shared with collaborators to allow them fit their own
      data or run simulations using identical option and protocol configurations.

Model.saveObj('my_noddi_config.qmrlab.mat');

4. Simulations

4.a. Single Voxel Curve

Simulates single voxel curves
  1. Analytically generate synthetic MRI data
  2. Add rician noise
  3. Fit and plot the respective curve

      x = struct;
x.ficvf = 0.5;
x.di = 1.7;
x.kappa = 0.05;
x.fiso = 0;
x.diso = 3;
x.b0 = 1;
x.theta = 0.2;
x.phi = 0;
Opt.SNR = 50;
% run simulation
figure('Name','Single Voxel Curve Simulation');
FitResult = Model.Sim_Single_Voxel_Curve(x,Opt);

4.b. Sensitivity Analysis

Simulates sensitivity to fitted parameters
  1. Iterate fitting parameters from lower (lb) to upper (ub) bound
  2. Run Sim_Single_Voxel_Curve for Nofruns times
  3. Compute the mean and std across runs

            ficvf         di            kappa         fiso          diso          b0            theta         phi
      OptTable.st = [0.5           1.7           0.05          0             3             1             0.2           0]; % nominal values
OptTable.fx = [0             1             1             1             1             1             1             1]; %vary ficvf...
OptTable.lb = [0             1.3           0.05          0             1             0             0             0]; %...from 0
OptTable.ub = [1             2.1           0.8           1             5             1e+03         3.1           3.1]; %...to 1
Opt.SNR = 50;
Opt.Nofrun = 5;
% run simulation
SimResults = Model.Sim_Sensitivity_Analysis(OptTable,Opt);
figure('Name','Sensitivity Analysis');
SimVaryPlot(SimResults, 'ficvf' ,'ficvf' );

5. Notes

5.a. Notes specific to noddi

Note-1

Section 2.b.1 is disabled for this model on purpose. The amico protocol contains a relatively larger matrix (109x7) of parameters, which is not favorable for including in the documentation in text form.

5.b. Generic notes

5.b.1. Batch friendly option and protocol conventions

If you would like to load a desired set of options / protocols programatically, you can use *.qmrlab.mat files. To save a configuration from the protocol panel of noddi, first open the respective panel by running the following command in your MATLAB command window (MATLAB only):

Custom_OptionsGUI(noddi);

In this panel, you can arrange available options and protocols according to your needs, then click the save button to save my_noddi.qmrlab.mat file. This file can be later loaded into a noddi object in batch by:

Model = noddi;
Model = Model.loadObj('my_noddi.qmrlab.mat');

  Model.loadObj('my_noddi.qmrlab.mat') call won't update the fields in the Model object, unless the output is assigned to the object as shown above. This compromise on convenience is to retain Octave CLI compatibility.

If you don't have MATLAB, hence cannot access the GUI, two alternatives are available to populate options:

  1. Use qmrlab/mcrgui:latest Docker image to access GUI. The instructions are available here.
  2. Set options and protocols in CLI:
  • List available option fields using tab completion in Octave's command prompt (or window)
Model = noddi;
Model.option. % click the tab button on your keyboard and list the available fields.
  • Assign the desired field. For example, for a mono_t2 object:
Model = mono_t2;
Model.options.DropFirstEcho = true;
Model.options.OffsetTerm = false;

Some option fields may be mutually exclusive or interdependent. Such cases are handled by the GUI options panel; however, not exposed to the CLI. Therefore, manual CLI options assignments may be challenging for some involved methods such as qmt_spgr or qsm_sb. If above options are not working for you and you cannot infer how to set options solely in batch, please feel free to open an issue in qMRLab and request the protocol file you need.

Similarly, in CLI, you can inspect and assign the protocols:

Model = noddi;
Model.Prot. % click the tab button on your keyboard and list the available fields.

Each protocol field has two subfields of Format and Mat. The first one is a cell indicating the name of the protocol parameter (such as EchoTime (ms)) and the latter one contains the respective values (such as 30 x 1 double array containing EchoTimes).

The default Mat protocol values are set according to the example datasets served via OSF.

5.b.2 Parallelization

Beginning from release 2.5.0, you can accelerate fitting for the voxelwise models using parallelization.

Available in MATLAB only. Requires parallel processing toolbox.

In CLI, you can perform parallel fitting by:

parpool();
FitResults = ParFitData(data,Model);

If a parpool exists, the ParFitData will use it. If not, a new pool will be created using the local profile. By default, ParFitData saves outputs automatically every 5 minutes. You can disable this feature by:

FitResults = ParFitData(data, Model, 'AutosaveEnabled', false);

Alternatively, you can change the autosave interval (min 1 min) by:

FitResults = ParFitData(data,Model,'AutoSaveInterval',10);

If something went wrong during the fitting (e.g. your computer had to be restarted), you can recover the autosaved data by:

FitResults = ParFitData(data,Model,'RecoverDirectory','/ParFitTempResults_*/folder/from/the/previous/session');

GUI users will be prompted a question about whether they would like to use parallelization after clicking the Fit Data button, if the conditions are met. When called from GUI, ParFitData will be run with default options:

  • Save temporary results every 5 minutes or whenever a chunk has finished processing
  • Split data into chunks with a granularity factor of 3
  • Do not remove temporary fit results upon completion

For further information:

help ParFitData

The default parallelization options can be changed in the preferences.json file located at the root qMRLab directory.

6. Citations

qMRLab JOSS article

Karakuzu A., Boudreau M., Duval T.,Boshkovski T., Leppert I.R., Cabana J.F., Gagnon I., Beliveau P., Pike G.B., Cohen-Adad J., Stikov N. (2020), qMRLab: Quantitative MRI analysis, under one umbrella 10.21105/joss.02343

Reference article for noddi

Zhang, H., et al. (2012). NODDI: practical in vivo neurite orientation dispersion and density imaging of the human brain. Neuroimage, 61(4), 1000-1016. 10.1016/j.neuroimage.2012.03.072


Quantitative MRI, under one umbrella.

| qMRPullseq | qMRFlow | Interactive Tutorials |

NeuroPoly Lab, Montreal, Canada